Heating & cooling · Updated 18 November 2026
Evaporative Cooling Service in Melbourne's West, Getting Your Cooler Ready for Summer
What a pre summer evaporative cooling service covers, the signs your cooler needs one, and our published price guide for Melbourne's west.
- 6 min read
- Written for Victoria

An evaporative cooling service before summer cleans or replaces the pads, checks the pump, water distribution, bearings, drain and float valve, and looks at the roof flashing around the unit. At Pivot Trade Services in Altona, we service evaporative coolers across Melbourne's west, and our published guide for an annual service is $220 to $380.
Evaporative coolers sit on the roof all winter, so most people only find out something is wrong on the first hot northerly. Here is what a proper service involves, the signs your unit needs attention, and how to get the most from it this summer.
Prefer to listen? Hear this as a podcast episode on The Service Hub.
Why does an evaporative cooler need servicing every year?
An evaporative cooler draws outside air through wet pads. As water evaporates off the pads it takes heat out of the air, and a large fan pushes that cooled air down through the ducts into your home. The only electrical loads are the fan and a small pump, which is why it is cheap to run.
Because the pads, pump and bearings live on the roof, they wear quietly. Pads go hard and build up minerals, pumps seize, and the water distribution can clog so half the pad stays dry. Half blocked pads cut both airflow and cooling. A pump that is struggling usually gives warning signs long before it dies, if someone is up there to hear it.
What is included in an evaporative cooling service?
A pre summer visit is about getting the whole unit ready, not just switching it on. On an evaporative service we cover:
- Pads. We clean or replace tired, hard or mineralised pads.
- Pump. We check the water pump is running properly.
- Water distribution. We make sure water is reaching the whole pad, not just part of it.
- Bearings. We check for wear and the whining noise that comes with it.
- Drain and float valve. We test them, because a failed drain or float on an older unit can leak into the ceiling.
- Tray. We dump and clean the tray to clear stagnant water left over from winter.
- Roof flashing. We check the roof penetration around the unit for any signs of leaks.
You can see more about how we install and service these systems on our evaporative cooling page.
What are the signs my evaporative cooler needs a service?
Some problems are easy to spot from inside the house. Book a service if you notice any of these:
- A musty or stale smell when the system first starts, usually stagnant water in the tray or growth on the pads after sitting through winter
- Weak airflow or air that does not feel as cool as it used to
- A whining noise from the roof unit, often the bearings
- Water marks on the ceiling near the outlets or under the unit
- The unit has not been drained or looked at since last summer
If the smell is sharp or electrical rather than musty, turn the system off and call us instead of running it.
How much does an evaporative cooling service cost in Melbourne's west?
We publish our price guides because we would rather you know before we arrive. Our Melbourne west guide, last updated in August 2026, is:
- Annual service: $220 to $380, covering a pad clean or replacement, pump check, bearings, and a drain and float test
- Pad replacement set: $350 to $700
- Pump replacement: $280 to $480
Roof access and the size of the unit move these figures. After we have looked at the job, we give you a written price rather than a range that changes on the day.
Should I service or replace an old evaporative unit?
Evaporative units last around ten to fifteen years, and the failures follow a pattern. Pads and pumps are routine parts and worth replacing. A corroded tray on a fifteen year old unit is usually the end of it.
When a unit has reached the end of its life, that is the natural time to ask whether evaporative is still what your household wants. We will quote a like for like replacement and a refrigerated option side by side, with running costs for both, so you can choose with the full picture.
How do I get the most out of my evaporative cooler this summer?
A few habits make a big difference to how comfortable the house feels:
- Start it early. Turn it on before the house heats up, on a low fan speed with the water on, rather than blasting it at 4pm.
- Open the right windows. Air has to leave the house for the system to work. Open windows in the rooms you want cooled, roughly a hand span each, and add more if doors start slamming.
- Close off unused rooms. Closing doors to rooms you are not using aims the cool air where you are.
- Watch the humidity. On a very humid day, run it on fan only or leave it off, because adding moisture to already humid air makes a room feel worse.
- Drain it for winter. Water left in the tray through winter grows organic material and speeds up corrosion. Most units have a drain or a winter setting.
Is evaporative cooling still the right choice for my home?
On a dry day with a northerly blowing, a well maintained evaporative system performs well and is cheap to run, because only the fan and a small pump use power.
It does have limits. It cannot dehumidify, so on muggy evenings at the end of a heatwave it cools very little. It needs windows open, so it does not suit a house that is locked up while you are out. It also brings outside air in, so on bushfire smoke days or in grass pollen season, a refrigerated system run with the house closed is the better option. We will talk you through both honestly.
If you run a ducted or split system as well, our heating and cooling maintenance plans include a written report after each visit.
Frequently asked questions
How often should an evaporative cooler be serviced?
Once a year, before summer. A pre summer visit that drains, cleans and refills the unit is the tidiest way to handle it if you would rather not be on the roof.
Why does my evaporative cooler smell when it starts?
Usually it is stagnant water in the tray or growth on the pads after winter. A service that cleans the tray, replaces tired pads and checks the water distribution normally fixes it.
Can I convert my evaporative ducts to refrigerated cooling?
Not directly. Evaporative ductwork is sized for much larger air volumes at lower pressure, so it is almost never suitable for a refrigerated system. We quote refrigerated changeovers as new duct systems.
Which suburbs do you service?
We are based in Altona and work across Melbourne's west, including Werribee, Point Cook, Williamstown, Footscray and Hoppers Crossing, with Geelong work scheduled rather than same day.
Book your evaporative cooling service
Get your cooler checked before the first heatwave books out every diary in the west. Call Pivot Trade Services on 0401 500 446, Monday to Friday 7:30am to 5:30pm and Saturday 10am to 5pm, for a service anywhere across Melbourne's western suburbs.
Pivot Trade Services
Altona VIC
0401 500 446
Find us on Google Maps
Browse every cost, rebate and comparison guide in the Pivot guides library, or claim the $60 off your first job voucher.
Want this priced for your place?
Tell us what you need and we will give you a written price, not a range that moves on the day.
- Free
- On-site quotes
- Fixed
- Written pricing
- 100%
- Workmanship guarantee
- 5.0★
- 63 Google reviews